The flexible prefab system calls for individual customer-based solutions, with several layout options. They can be used either as individual units or larger buildings made up from a combination of units. A flexible panel system and the installation of partition walls allows for design of any room- or building size.
20ft standard specification
The versatile standard flat-packed unit is suitable for international transport. Its dimension is of an appropriate size to make transit by road, air or sea easy to manage. Lifting, by crane is made simple by the recessed lifting eyes at each corner.
The flat-packed unit is designed as a lightweight construction consisting of floor and roof frames with corner profiles. The construction enables more than one flat-packed unit to be connected to another, thereby allowing a larger internal open space. The units may also be stacked when erected, to form a two or three storey building, accessible by an external/inner stair.
Dimensions/Tare·External length/inner length: 6.058m/ (5.858m)
·External width/inner width: 2.438m/ (2.238m)
·External height /inner height: 2.791m/ (2.520m)
·Tare: 1950 KGS
Frame ·Cold formed 3-4mm Steel Profile
·Wind resistance capacity>120km/h,
·Seismic resistance capacity > grade 8
Floor·0.5 mm flat galvanized steel sheet
·100mm non combustible Rock Wool
·18mm fiber cement board covered with PVC flooring
Roof 0.5mm galvanized & painted steel sheet
·100mm non-combustible Rock Wool
·CE electrical fittings (Protection switch, quick disconnect, wiring)
Door·Single fold, 40mm thick
·Insulated with PL (polystyrene)
·Opening dimensions of 808×2030mm, with a handle lock with 3 keys.
·Net opening dimensions: 754 x 1985 mm.
Wall panel·0.5mm galvanized & painted steel sheet
·60mm rock wool / EPS / PU
·9mm chipboard or 0.5mm galvanized & painted steel sheet
WindowMade of PVC, white color, with dimensions 800×1100mm, glazed with double layer glass with sliding mechanism (one side fixed and one sliding).
Electrical Installations·External industrial socket: CEE-connection plug/socket, 3-pole 32 A, 220V～
·Inner distribution system: BVVB cables (6, 2.5, 1.5 mm2), CE marked, flush-mounted.
·Electric distribution box·Fluorescent lights 2×36W – 2 each.
·Flush-mounted Sockets – 4 each.
·Flush-mounted Switches – 1 each.
Standard Variety of usages, such as ablution, office, accommodation and so on. Meanwhile, as per the advantage of easy combination on this module, more facility to be developed upon requirement time by time.
The VIP units are suitable for:
• Accommodation units
• Office / Hotel
• Large Camps
• Temporary Housing
• Construction sitescustom 20ft Container House Designs
1 mensaje • Página 1 de 1
¿Quién está conectado?
Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 32 invitados